The SSEM's 32-bit

The SSEM's 32-bit word length was increased to 40 bits. Each word could hold either one 40-bit number or two 20-bit program instructions. The main store consisted of two Williams tubes each holding an array of 32 x 40-bit words – known as a page – backed up by a magnetic drum capable of storing an additional 32 pages; the capacity was increased to 128 pages in the Final Specification version. The 12-inch (300 mm) diameter drum,[16] initially known as a magnetic wheel, contained a series of parallel magnetic tracks around its surface, each with its own read/write head. Each track held 2,560 bits, corresponding to 2 pages (2 x 32 x 40 bits). One revolution of the drum took 30 milliseconds, during which time both pages could be transferred to the CRT main memory, although the actual data transfer time depended on the latency, the time it took for a page to arrive under the read/write head. Writing pages to the drum took about twice as long as reading.[13] The drum's rotational speed was synchronised to the main central processor clock, which allowed for additional drums to be added. Data was recorded onto the drum using a phase modulation technique still known today as Manchester coding.[17]
The machine's instruction set was increased from the 7 of the SSEM to 26 initially, including multiplication done in hardware. This increased to 30 instructions in the Final Specification version. Ten bits of each word were allocated to hold the instruction code. The standard instruction time was 1.8 milliseconds, but multiplication was much slower, depending on the size of the operand.[18]
The machine's most significant innovation is generally considered to be its incorporation of index registers, commonplace on modern computers. The SSEM had included two registers, implemented as Williams tubes; the accumulator (A) and the program counter (C). As A and C had already been assigned, the tube holding the two index registers, originally known as B-lines, was given the name B. The contents of the registers could be used to modify program instructions, allowing convenient iteration through an array of numbers stored in memory. The Mark 1 also had a fourth tube, (M), to hold the multiplicand and multiplier for a multiplication operation.[17]


aircard adapter
Chinking

The machine's instruction set was increased from the 7 of the SSEM to 26 initially, including multiplication done in hardware. This increased to 30 instructions in the Final Specification version. Ten bits of each word were allocated to hold the instruction code. The standard instruction time was 1.8 milliseconds, but multiplication was much slower, depending on the size of the operand.[18]





Real Estate Park City Utah
louisville homes for sale